Products of other enterprises
Description
Stainless steel - represents a group of corrosion-resistant steel that contains at least 10,5 % of chromium. Apart from chromium, stainless steel is alloyed with nickel, molybdenum, titanium, niobium and other elements. Mechanical properties and application depend on the chemical composition.
Delivery programm
| Product Type | Thickness | Width | Length | Finish |
| Cold Rolled Sheet | 0,20 - 8,00 mm | 1000,00 - 2000,00 mm | 1000,00 - 6000,00 mm | 1D, 1E, 1U, 2D, 2B, 2R, 2G, 2K, 2F, 2M, 2H, etc |
| Hot Rolled Sheet | 2,00 - 10,00 mm | 1000,00 - 1500,00 mm | ||
| Hot Rolled Plate | 8,00 - 110,00 mm | 1000,00 - 3000,00 mm |
Standard Surface Finish
| ASTM | EN | Description | Notes |
| HOT ROLLED | |||
| No.1 | 1D | Hot rolled, annealed and pickled. | Rough and dull surface. |
| COLD ROLLED | |||
| 2D | 2D | Cold rolled, annealed and pickled. | Surface not as smooth as 2B or 2R. |
| 2B | 2B | Cold rolled, annealed & pickled, skin-passed. | Smooth surface with low gloss. Smoother than 2D |
| BA | 2R | Cold rolled, bright annealed, skin-passed. | Smooth, bright, reective, high image clarity |
| HARD TEMPERED | |||
| 1/4, 1/2, 3/4, 4/4 |
2H | Temper rolled, annealed & pickled. | Higher gloss than 2B and 2D. |
Special Surface Finish
| ASTM | EN | Description | Notes |
| HOT ROLLED | |||
| - | 1U | Hot rolled, not heat treated, not descaled. | Surface is covered with the rolling scale. |
| - | 1C | Hot rolled, heat treated, not descaled. | Surface is covered with the rolling scale. |
| - | 1E | Hot rolled, heat treated, descaled. | Surface is free of scale. |
| COLD ROLLED | |||
| No.3 | 2G | Cold rolled, annealed & pickled, polished with 80 - 120 grit. |
Uniform nish with a coarse texture |
| No.4 | Cold rolled, annealed & pickled, polished with 150 - 400 grit. |
Unidirectional abrasive texture with little reectivity. | |
| Scotch bright | 2K | 2B or BA nish, polished to satin nish, skin-passed. |
Similar to No. 4 dull polish, but with a smoother surface texture with a little more reectivity. |
| - | 2F | Cold rolled, annealed & pickled, skin-passed. | Uniform non-reective matt surface. |
| Emboss | 2M | Patterned, design is to be agreed. | A ne texture nish mainly used for architecture. |
Equivalents
| EU | UNS | AISI | GOST |
| 1.4301 | X5CrNi18-10 | 304 | 08Х18Н10 |
| 1.4303 | X4CrNi18-12 | 305 | 06Х18Н11 |
| 1.4305 | X8CrNiS18-9 | 303 | - |
| 1.4306 | X2CrNi19-11 | 304L | 03Х18Н11 |
| 1.4310 | X10CrNi18-8 | 302 | 12Х18Н9 |
| 1.4310 | X12CrNi17-7 | 301 | 15Х17Н7 |
| 1.4372 | X12CrMnNiN17-7-5 | 201 | 12Х15Г9НД |
| 1.4373 | X12CrMnNiN18-9-5 | 202 | 12Х17Г9АН4 |
| 1.4401 | X5CrNiMo17-12-2 | 316 | 08Х16Н11М3 |
| 1.4435 | X2CrNiMo18-14-3 | 316L | 03Х17Н14М3 |
| 1.4541 | X6CrNiTi18-10 | 321 | 08Х18Н12Т |
| 1.4567 | X3CrNiCu18-9-4 | 304Cu | - |
| 1.4550 | X6CrNinB18-10 | 347 | 08X18H12Б |
| 1.4571 | X6CrNiMoTi17-12-2 | 316Ti | 08Х17Н13М2Т |
| 1.4597 | X8CrMnCuNB17-8-3 | 204Cu | - |
| 1.4833 | X12CrNi23-13 | 309S | 08X23H13 |
| 1.4841 | X15CrNiSi25-21 | 314 | 20Х25Н20С2 |
| 1.4845 | X8CrNi25-21 | 310S | 20Х23Н18 |
| 1.4878 | X8CrNiTi18-10 | 321H | 12Х18Н10Т |
Contact the seller
Stainless steel sheet/plate (AISI 200* - 300* series)
We recommend to see